• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the fabric instead of onto the floor where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is substantial, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a number of problems such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can reach the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the old caulking may require removal before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens with an ease. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier with someone else to help hold the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window repairs near me should open.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window sticking and help prevent corrosion. This should be done at least every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges, also because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. If they're beyond repair, it could be required to realign them. The interlock, which is on the hinge side of the window, may be misaligned. Again, it's possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.