• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Properly Start a Wood Burning Stove

Wood stoves are an ideal method to reduce energy consumption and also heat rooms. However, they need an amount of care.

A majority of modern wood stoves comply with EPA emission guidelines. Look for an EPA sticker under or beside the grate, to ensure that your stove doesn't generate a lot of harmful pollutants.

How to start a Wood Fire

The scent and sound of a fire made from wood can be a wonderful addition to any home. However, it is important to know the proper way to build a fire in your stove. Improper techniques can result in a fire which does not burn well, and may produce smoke or creosote. These tips will help you begin an efficient fire that will warm your home quickly and efficiently.

Before you start a fire, you should check the condition of your coals and logs. If they are wet, it will smother your fire and prevent the proper burning. You might also want to open the flue to let out any ash that has fallen into the stove.

Begin by putting a handful of small dry newspaper pieces in your stove. This will help to ignite the fire. When the tinder and the kindling are beginning to ignite, you can add the larger kindling pieces on the top. This should be done using an arc pattern so that there is air between each piece.

If you own a wood stove with an automatic control of combustion that will automatically deliver an air stream that is controlled to the flame as it heats. This will enable the fire to burn at a steady rate without the need to open the stove's door to maintain it.

Be careful not to use too much tinder, as it will cause the fire to burn at a fast rate and will not be able to use the fuel efficiently. Once you've got a good bed in your stove of sparks, tinder and kindling to start the main flame, you can do this by laying down two large logs of the base on the grill. Then, you can lay an additional layer of smaller logs perpendicular to these and on top of the base logs. This "top-down" method of building the fireplace will create a long-lasting, efficient fire that doesn't completely engulf larger base logs.

Close the damper once your fire has been established and kept it closed. The fire can be smothered if the user opens the damper before it has fully established. This can also affect the efficiency of the fire.

Adding Wood

Stoves can be used to efficiently heat your home and also save you money. They can be used on their own or together with central heating or furnace system to provide the supplemental heating required in large homes or houses with a lot of rooms. Many of the latest stoves that are clean burning available on the market use an advanced combustion principle which can separate the burning volatile substances from combustible gasses and tar. This is achieved by providing air at two distinct stages. The first stage is for the vaporization, while the second is to provide fresh air that is pre-heated. This improves the combustion process and reduces the smell.

The amount of heat you will get from your stove depends on the kind of wood used as well as the amount of moisture in it and the size of the logs. To let the wood dry, logs must be kept in a ventilated location for a couple of months prior to burning. If the logs contain excessive moisture, they will create steam that is in essence wasted energy.

You should add wood to the pile at intervals and not all at all at. Adding too much wood at one time causes the temperature in the firebox to rise and creates a vortex that draws smoke and unburnt volatile compounds back into the flame, which can decrease the efficiency of your stove.

Avoid using other combustibles in your stove wood burning (www.webwiki.at), like paper or cardboard because they are not wood. They have different physical properties and cannot be burned without creating dangerously high temperatures. You should not burn compressed combustibles such as wood burning stoves for sheds briquettes because they differ in chemical and physical composition from firewood. They are also not type-approved to be used in wood burning stoves.

If you are installing wood-burning stoves into your home, it's essential to have it installed and tested by a qualified. A certified WETT technician will test the installation for proper operation and safety, and also ensure that your chimney is functioning properly. They provide maintenance services for your stove and chimney to keep them in top condition. They can inspect the areas that are accessible to your chimney for leaks, and repair any problems discovered. They will also ensure that all occupants of the house understand and adhere to the fire evacuation procedures in the event of an accident.

Adjusting the Damper

When you're not making use of your stove, a damper can control the amount of heat that is lost through the chimney. In addition to this it can also help you control the fire. If the flue is open but the damper is closed too much the fire won't be able to burn properly and it will release smoke into your living space. You can adjust the damper to ensure the best flames by experimenting with different positions.

You want to keep your damper open to allow air to flow into and out of the flue when a fire is burning. This lets the fire get going and keeps it in good shape so that you can enjoy it for a long time. The proper opening will stop the fire from being deprived of air and stop it from blowing smoke.

To adjust your damper correctly it is important to first make sure that the fireplace has been preheated and the wood burners garden stove is hot. This will ensure the chimney is warm and also that it has a good draft. After that, the damper on the wood stove can be adjusted.

After the fire has burned for an extended period, close the damper about three quarters cost of wood burning stove the way. This will prevent warm air from the room from escaping into the chimney, but still allowing smoke to escape.

This is the best method to keep your fire lit and to prevent it from becoming too hot. If you shut the damper too far it may stop the draft from working, however when it's too open, a cold wind could blow into your home.

You can check to see how much the damper is opened by placing your hands near the top of the inside of the flue pipe. If you feel a slight breeze pushing against your palm The damper is most likely in an open position.

The damper settings can differ slightly from one stove to the next and even between different types of wood. You can experiment with different settings to get an idea of the most suitable setting for your stove.

Clean up

It is crucial to clean your flue and stove after the start of a fire. This will help to reduce the chance of a chimney fire which is the main reason for wood stove fires in homes. Creosote, a sticky substance which can build up within the stovepipe, can be extremely hazardous. It is caused by moisture and unburned wood particles that cannot escape the fire. This can also be caused when fires aren't lit properly.

Regular cleaning helps to prevent creosote buildup. The best method to do this is to sweep the chimney every year. It is also recommended to have your stove and fireplace professionally cleaned and examined at least every year.

It is also an excellent idea to clean the ash tray and grates regularly. It is recommended to use only seasoned wood for burning, as it will create less creosote and ash. Avoid burning cardboard, paper and plastic. These items can release dangerous chemicals into the air and flue which could be released in your home.

The glass that is used on the wood burning stove has to be cleaned regularly as well. A lot of modern wood stoves are designed with self-cleaning glass, meaning that they don't require a lot of cleaning. If you are not able to clean the glass of your wood stove as clean as you'd like There are stove glass cleaners available that you can use on the window.

Other helpful tips to maintain your wood stove include turning the vent down when you're not using it and slamming the door or window to increase the flow of air. This will keep the fire burning more hot and efficient. The wood stove will not need to work as hard in order to circulate air. It is recommended to not stack logs or leave them in the flame for long durations of time, since this could lead to splitting and warping. It is advised to avoid using combustible compressed wood in your wood stove as the paraffin contained within them can melt and flow into the flue which could cause damage.