• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

5 Tips For Car Keys Repairs

Modern car keys are quite complex, and require professional repair when they break. This article will provide 5 tips for keeping your car keys in good condition.

In most instances, key fobs and remote controls can be repaired by simply replacing the battery. In some instances it is necessary to reprogramme the device. Consult your owner's manual for specific instructions or seek out professional assistance.

Battery Replacement

Many modern cars now feature remote key fobs that include keyless entry and remote start features, in addition to the traditional car key made of metal. These keys are powered by small batteries that eventually die and require replacement. The process is simple and can easily be done by any auto accessory store that stocks the correct type of battery for your vehicle model.

First, consult the owner's manual for your vehicle to discover what kind of battery is used in your key fob. Once you have this information, visit your local auto parts store and purchase a replacement. Oftentimes, you can find the same battery at a discount or even for free with the promotion.

Once you have the new battery and you've opened your key fob and remove the circuit board by pulling apart two of the seams using a screwdriver with a flat head or your fingernail (if you are careful not to press anything). Find the compartment for the battery. It'll be slotted in or have a plus/minus mark embossed. Then, carefully place the new battery into place and ensure it is properly positioned based on the way the old one was.

After the new battery is in, replace the circuit board and then snap the two halves of your key fob together. After it's reassembled, test the buttons to ensure everything works as intended. The key fob's ID is not affected by changing the battery, which means it shouldn't be required to be replaced after the repair. This is good news for drivers looking to save money by not having to go to a locksmith or dealer.

Ignition Cylinder Replacement

Modern car key ignition systems are complex and require a precise series of movements before the engine can start. If something interrupts that process, such as an unrepaired key cylinder that could cause your vehicle to stop running with no power. Although it is possible to replace the key cylinder however, it's not an easy procedure. The ignition is an intricate, one-key system. It requires specialized tools and precise oiling.

Find out if you can switch the ignition to the accessory position. Also, verify that the key will fit correctly. This will help you identify the problem. If you cannot turn the cylinder in any direction, consult your owner's guide or contact a locksmith for help with the ignition.

If the cylinder rotates in the accessory position, you can use a screwdriver to push the small anti-rotation switch located at the base of cylinder. You can then rotate the cylinder until the slot line and tabs are up, and then slide it out of its casing. If the cylinder doesn't move in any way, or is stuck in a dead end, you may have to tap it with a hammer or drill it. Be careful because drilling or rapping could cause damage to the steering wheel.

Once the old cylinder is gone, the new ignition cylinder will be installed in its place. The next step is to code the cylinder so that it matches the key both in terms of sequence and orientation. It is also necessary to remove and inspect the tumblers. You'll also need to replace any worn-out tumblers.

After replacing the cylinder after which you'll need to connect the steering column and dashboard covers in their proper order. Reattach the dashboard and column covers in the right order. Be careful not to disrupt the wiring. It's easy to disconnect or damage important electronics. Reattaching the negative battery cable is important. Test your new ignition.

Key Programming

Modern car keys are equipped with a computer chip that communicates with the vehicle. In order for the key to start the engine, the chip and car need to "know each one another".

A locksmith who has experience with many different kinds of vehicles can reprogram a key quickly. They can also help you in the event that your car's lock has been damaged.

Many car key repairs near me locksmiths will claim that the process can take just a few minutes if you follow all steps correctly. It may take longer for OBD2 programming or EEPROM programming, as these procedures require your locksmith to extract specific modules from the car (security components) to determine the correct passcode as well as key data stored. These types of procedures are best reserved for professionals with in-depth knowledge of circuit boards and electronics which reduces the chance of corrupting data.

People frequently forget their keys to their car at home, or they leave them in the trunk of the car after putting groceries in the back seat. In these scenarios, you can often be stranded on the side of the road, without any way to get home or get to your destination. If you have a spare car, your locksmith can program it to your car to allow you to drive off once again.

Car keys can stop working for a variety reasons, including normal wear and tear or if the lock is compromised. If the teeth of your car key aren't fitting the lock it is an reason to replace the key.

Many people try to program their car keys. However, it's advised to employ a professional instead. These DIY methods can corrupt the information on your car keys, causing it to malfunction or, even more damaging, damage to your security system. A professional is less likely to make an error that could cost you thousands of dollars in the future.

Broken Key Removal

You'll have to remove your broken key from the ignition cylinder in case it breaks. It will be impossible to drive your vehicle until the key is removed, and it's best to call an expert for this job, as there is a risk of damaging the ignition through the wrong use of lubricants and extraction tools. If you're looking to repair your car keys that have broken at home There are a few options that may assist.

Utilizing a pair of needle-nose pliers that have extra-long tips can be a good way to grasp the end of the key that is still sticking out from the ignition. You can also supercharge your pliers by coating their business ends with an adhesive substance such as super glue, melted wax or putty. Once this is done the pliers will be able hold onto the key fragment and pull it straight out of the cylinder.

A flexible, thin wire can be used to slide along the broken part of a key and then pull it out of the lock. Paperclips can be used for this however, you must bend the ends a bit so that the fragment of the key is gripped by the wider surface.

Mini hacksaw blades are a useful tool to fix broken keys, however they must be extremely thin and small in order to fit into the tiny opening in an ignition cylinder. These tools are available at hardware stores or in the auto parts section of some large box retailers.

Spraying some lubricant in the keyhole may help. It could loosen the stuck piece and make it easier to take it out. Never try to force a damaged car key out, as this could cause further damage to the key, and even the ignition. A car key that is bent or broken in half can be a risky and difficult task to repair, which is why it's a good idea to keep a spare car key in a secure location in all time.