• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you may think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you're happy with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need close your window and do an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it is about upvc window repairs (hop over to this site), do not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. These are easily repaired by any skilled DIYer and are usually done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

Verify that the upvc window repair hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to give assistance.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become disaligned as a result of wear, creating a gap where the sash meets frame. If they are damaged beyond repair, it may be required to realign them. The interlock may also become disaligned. It is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace these.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.