• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to source some plastic spacers that help the new pane to fit properly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time they are susceptible to a range of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with the breeze. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change a window hinge but it's much easier if someone else helps hold the frame.

It is also important to verify that the Upvc Window Repair hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide advice.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your upvc window repair near me windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it may be possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically fabric tubes that are filled with some type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.