• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sagging. A sagging window can cause problems with light, draughts or even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window to access the frame. Then, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and wet floors. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer is applied. It is important to remember that when it comes to upvc window repairs - you could check here,, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze it could be hinges at the fault. These are easily replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, this causes gaps to develop where the sash meets the frame. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to give them a clean but in some cases it might be necessary to have these replaced.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be positioned on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognize that all windows have a life span and they may reach the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc, it's best to consult an expert immediately.