• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Sash Window Repair

Sash windows could be out of balance or break. Pam browses the internet for salvaged wavy glasses, and keeps an eye open for discarded sashweights made of metal. She then searches for replacements in the form of washers or nuts to help balance her window.

Pam puts each pane in with a rope of glazing compound she works into the rabbet groove, also known as a pocket, that is around the opening. This reduces drafts and reduce the cost of heat loss.

Sashes that stick Sashes

If your double-hung windows get stuck in the middle, it's an absolute nightmare. They'll be difficult to see when they squeak during a storm. On the other side, a window that's too loose can let outside air and noise through, and your energy bills may increase. This is neither optimal, but both can be solved with the proper tools and perseverance.

One of the most common issues with weighted sash windows is that paint could build up in the channels that they slide on, causing them blockage. The majority of these issues can be solved by cleaning and oiling the tracks.

Remove the old caulking from the space between the window stop (the one on the inside) and the frame of the window. Scrape off any paint that has built up. Make sure you use a sharp blade, and then put up sheets of plastic and a vacuum cleaner directly below to keep any paint dust and chips.

Clean the tracks with a dry cloth, and apply an oil based on silicone to aid in their smoother movement. The lubricant can be found at most home improvement shops or online. Then move the sash up or down to test it.

If it is still jamming, there could be an issue with the sash cord. Check to see whether the cord is caught or hanging in the sash, or has snapped off completely. You'll need to re-cord your window in the event of this.

A pin that holds the rail in place might have been ripped out. It can be difficult to fix and you'll need to call in an expert most times.

Make use of a wood hardener if the wood is swollen and warped but there's no pin. The liquid is quick drying and can restore damaged wood. It's not necessary remove your sash windows in order to repair them. After you've used it, you can pry apart the two sashes by placing a piece wood in the bottom corner of the window where they meet.

Draughts

Draughts can be a major issue for windows with sash windows that are old particularly in winter months. They are often caused by rotten wood or cracked putty, worn weights for sash or sash cords that aren't balanced that allow cold air to get into the window, making it difficult to keep your home warm. You can prevent draughts by filling gaps with expanding foam, or using draught-excluding strips available at most hardware shops. These are effective, but they will need to be replaced periodically because the foam expands and wears away with wear and use.

Gapseal is a more permanent solution. It's a spongy, rubbly seal that you can cut and then push into the gaps between the sash window frames. It can be used by itself or with adhesive strips on the top and bottom. This option is costly and you'll have to reapply it throughout the life of your window. However, it is a long-term fix and is simple to remove.

Another popular DIY draught proofing solution is to use cling wrap that is rolled up and placed into the gaps around your window. This is an effective draught stopper, but the drawback is that it could hinder sash movement completely and could pose risky for fire. Furthermore, the sash will need to be removed to re-open the door and the cling film needs to be reapplied each time you close the sash.

As part of a comprehensive renovation you can have your window draught-proofed professionally. This could include new sash cords and parting beads, staff beads, lubrication of pulley wheels, and rebalancing the weights, in addition to staining or painting the frames and sashes. This can help to restore the function of the sash, and increase its energy efficiency, in addition to dealing with any minor timber defects. It is less disruptive than taking out the windows, and can reduce draughts, improve the thermal efficiency and dramatically reduce the cost.

Decay

The good thing is that your sash window frames are not in need of repair if they've been damaged or deteriorated. The frames of these windows are usually constructed of high-quality wood. With the proper restoration they can be rehabilitated to provide high performance for a long time. Regular inspections are crucial in ensuring that the wood is adequately ventilated. This will help prevent moisture build-up that can lead to wood decay.

The majority of issues that arise that arise from sash windows are readily evident, but some are more difficult to identify. Wood decay is a challenge to treat, since the fungus consumes the wood. Although it is possible to repair rotten timber but the best way to prevent further rot is by keeping the wood dry.

The first step is to strip any paint from the hardware. It is possible to remove the bottom rail from the frame, and the rail for meeting (this will depend on the location of the sash). The "pocket covers", which are small pieces of wood on the frame's side that allow access to the weights should be removed. You may require a sharp knife for removing them if they're attached by nails or paint. Once the pockets have been removed, you can begin cutting out any wood rot and apply an excellent, water-resistant filler. Once the filler is dry, it is recommended that a coat of primer be applied to protect against further decay.

It is a smart idea to inspect inside the window for sashweights to make sure they are properly balanced. They shouldn't be misaligned, or pulling one side more than the other. If they aren't balanced, the sash can drop off its track and cause damage to the frame. The sash weights can be replaced with new ones or a new balancing mechanism could be fitted, which will stop the sashes from bouncing to the wrong side of the window frame.

Poor Security

Over time sash windows are exposed to the elements and prone to deterioration from weather and general wear. As time passes, this could result in wood decay that in turn will need to be replaced, a costly repair that needs to be dealt with as soon as possible. Water marks on the window or on a softened frame could be a sign of decaying wood. It is important to consult an expert to evaluate the situation, and determine if any sash window repairs are necessary.

As time passes the rails on the bottom may also be damaged. Sills that have water marks or a window that is soft to the touch may indicate this. A professional consultation will also be required to evaluate the situation and recommend any needed repair or replacement of sash window components.

It can be very concerning when triple and double windows are glazed and start to allow noise pollution back into the home. If this happens, the structural integrity may be in danger and the sash windows will have to be replaced.

One common sash window repair problem is when the sash gets stuck in the frame. This can be caused by the cord snapping or a problem with sash rattles. If it is the latter the gentle persuasion is usually enough to get the window open and then the ratchets must be reset.