• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Cat flaps allow your pet to go inside and out at their own pace, without needing to let them in or out. They also can help stop your cat from urinating in the home.

Fitting Cat Flap In Upvc Door Panel a cat flap in a upvc door panel is much simpler than installing one in glass doors, however it will require some expertise and the proper tools.

Take a look at the Door

Installing a cat flap on the door isn't easy but as long as you select the right kind of cat flap installer flap be patient and follow the instructions provided it should not prove to be a problem. We will show how to trace the shape, using the jigsaw to slice the area in the door and then finish off the job by fixing the cat flap to the door. This will ensure that the flap remains in place and protects the door from wind and rain which can cause damage.

The first thing to do is determine the width of your pet in order to get an accurate measurement of what size of cat flap you will need. This will let you select a cat flap that is large enough to allow your pet to go into the home and exit without having to open the door every time.

If your kit has an illustration of the location to drill, then put it on the door and then draw a pencil around it. If your door has a moulding or sill on the bottom edge ensure you have enough clearance from these as this will ensure your cat's safety and will prevent them from getting access to your home.

Put on your eye protection as well as a dust mask, and using a jigsaw begin to cut according to the lines you have pencilled in, but don't push the blade too hard because this could cause it to cut faster than you want it to. Set the square with a ruler to ensure that you're cutting the material properly and that the hole is a rectangle shape. When you are happy with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and out without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature inside your home steady. However, fitting an animal flap on your door can seem like an overwhelming task for those who have never done it before. This can lead many to hire a professional carpenter or joiner to complete the task. While this is definitely an option, it's possible to do the work yourself if you own the proper tools and follow instructions with care.

While this is far simpler to accomplish with a timber door, it is still possible to do this in uPVC doors - although you should be careful to avoid damaging the doors since this could end the warranty. The first step in the process is to measure the door and ensure that it can fit the new cat flap. If you have an ordinary uPVC panel it's easy. However when your door is composite or a different type of door, you might need to be more careful.

The next step is to determine the belly height of your cat. This is the height from the floor to the lower part of the cat's stomach, and you'll need locate a place in the door that will be within the range your cat can comfortably pass through. Once you have the information, you'll need to mark the area with a spirit level and a pencil, so that you know the hole will fit your cat.

After you have marked the area, it's time to cut the hole. You will require an jigsaw. It is essential to be patient to ensure that the cuts are clean and smooth instead of uneven and rough, since it could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask when using the jigsaw, since breathing in the dust could be hazardous to your health. Once you've finished cutting the hole, you will need sandpaper to smooth the edges so that the cat flap can be easily inserted into the hole.

Cut a hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit is quite difficult. If you're not proficient in DIY, it is recommended to hire a professional to complete the job for you. A mistake in the process may not just be ugly, but it could also be an enigma for security as well as allowing cold air to enter when the cat is outside and hot air to escape once inside.

Mark the hole's position on the door with an eraser and a spirit level. This will ensure it is properly positioned and is flush with the rest of the door. Make sure to have sandpaper to smooth any rough edges.

Wear any safety equipment you require when working with an electric tool. If you are worried about the sound of a jigsaw you can buy an electric version that is quieter and simpler to use.

It is crucial to only cut away the material needed to make the cat flap. It is essential to leave a little extra material to make the wall thickness of the flap. However, removing too much can cause issues or even damage to the door frame.

A door made of upvc may contain a metal frame or a panel inside that could interfere with the microchip cat flap, and in this case you'll need to make an over-sized hole to ensure that the metal does not touch the wall of the cat flap cover for winter flap. If this is the case, it is crucial to fill in the gap and render it watertight.

If you're installing an animal flap to a upvc door or double glazed windows with a frame made of metal, you will need to speak to a professional who will provide you with a brand new pane of glass with the hole for the cat flap in it. This will be cheaper than trying to fit the flap into an existing pane that wasn't designed specifically for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to come and go whenever they want and let them relax in the house when they want to. If you've got an uPVC door it can be difficult to fit a cat flap, especially in the absence of glass panes that can be cut to fit one. If you're able to purchase and install a replacement half-glazed uPVC panel, it's possible to fit an animal flap onto the doors. It's not a simple matter of drilling holes in the door. You'll also have to do a few things to ensure it's safe.

A composite, upvc door panels with cat flap or GRP door panel is typically composed of a plastic skin that is bonded to an insulating polystyrene base. The material is quite fragile and care must be taken when cutting through it to avoid damaging. This kind of door comes with a template that you can use to cut the hole.

After you have carved out the hole in your front door, it's time to put in the cat flap. You can pick from a wide range of options, from simple push-button models to ones that are microchip-activated and allow only your pet to enter. No matter which type of cat flap you pick it is essential that your cat is able to use the flap without getting stuck in bad weather.

A circular fitting a cat flap is more effective than a square, because circles can be cut more securely into the glass. This is because square holes make the glass more susceptible to cracking if drilling is applied to it. It's also a much safer option to use as you don't risk drilling into toughened glass that may break and hurt your pet or your family. This is particularly crucial if you have children or elderly people at home who could be injured by glass shattering.