• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance, you will need to find some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the window and the door is substantial, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

To fix a window repair near me that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give advice.

It is also crucial to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges may also become misaligned due to wear, creating gaps between the frame and sash. This can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace these.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more efficient to replace them than repair them. If you are experiencing problems with your upvc window repair windows, it is always best to seek professional assistance as soon as you can.