• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Replace Door Handles

Door handles are a crucial part of your home's decor. A new handle can elevate your home's decor and bring your decor up-to-date.

Over time the knobs on your door could become stiff or even break. These are indications that it's time to replace upvc door handle the knobs. This guide will help you select the right replacement door Handles (morphomics.Science) door handle for your home.

Door Knobs

Door handles can enhance the appearance of your house while making it easier for people to open and close doors. They are available in a wide range of colors, finishes and types of window handles to match your decor. If yours are starting to appear worn or simply require an upgrade replacing them is simple and can be completed in just a few steps.

You need to locate the shaft, or spindle, through which the knob is attached to the door. Some have a tiny hole that you can put a narrow screwdriver into to remove the set screws holding the handle in place. Others have a thin slot or hole where can be used with a flathead screwdriver to push on a spring-activated pin, also known as a detent. When you press the pin it opens the latch mechanism and allows you to pull or push the knob.

Once you have the spindle, or shaft in your hands, remove the old knob and replace it. Make sure it is aligned correctly and ensure that the latch is working properly before tightening the set screws.

After you've replaced the knob, place the rod of the latch over the hole in the door and then lock it using the rod mechanism on the second knob. Make sure that the holes are aligned then tighten the latch plate screws.

Some people prefer an brushed or smooth metal finish for the door hardware to give their home a sleek and contemporary appearance. This will match their other furniture. Others prefer a more rustic style that is a good match for spaces that are reminiscent of farmhouse. If you have a member of your family with mobility issues, you may want to choose a lever style or rim lock, which requires less pressure to operate.

Other aspects are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are key issues that have led to the creation of new and innovative designs for handles, such as ones which can be operated by the forearm of a person.

Latch

The latch that holds the handle of your door open may wear out over time. Switching out the old latch to accommodate the new handle is an easy DIY project and will make a huge change in the way your door opens and closes.

Depending on the type of handle you have the latch could be part of the knob itself or it might be an independent piece that is attached to the door. In either case, you'll need to follow the same steps for removing and replacing. Getting the old latch out of place is fairly easy especially if the door handle has what's known as a "magic button". The tiny pressure-slot, which is located on the side knob, is what you have to press to pop the latch out of the handle.

If your handle does not have this magic button you'll need to remove the cover plates that are placed over the latch plate. They are typically circular or rectangular and can be removed using the aid of a screwdriver. Some have a tiny slot in them where you can put your screwdriver into, while others snap off.

Then, loosen the machine screws that attach the inner plate and latch to the door handle. These are the screws with a sharp tip and you'll be required to keep them in a secure location to reuse them in subsequent steps. After these screws are removed, you can take the latch plate and mechanism out of the hole in the door and place it in a safe place.

Now you can begin installing the new latch. Insert the latch plate into the door hole and secure it with the hardware provided. Make sure that the square pin on the interior of the latch faces the latching mechanism of the handle and is aligned with the other screw holes in the handle. Then, push the outside latch plate onto and secure it using the provided screws.

Strike Plate

One of the most frequent reasons to replace the door handle is that it is loose or isn't upvc window locking handles properly. This is usually due to incorrectly aligned parts of the latching mechanism, such as the strike plate being too short or has moved up or down on the doorjamb with time. This project allows you replace your old strikeplate with an extended one, which will offer more security for your door and ensure it stays closed.

Apply a lipstick or another marking material on the bolt that you are using to determine if it's the strike plate. Close the door, and then try to latch it. If the mark is below the strike plate's hole, this means that your door won't latch because the plate is too short. If the mark is above or below the strikeplate hole, the strikeplate is likely to have been moved upwards or downwards on the doorjamb.

Depending on the door depending on the door, you might be able to install the new strike plate into the door over the old one using the screws included with it. But, you may have to drill holes first, and then chisel a bit of the wood to make sure it's a snug fit. If this is the case, you must be cautious not to chisel too hard or you'll cause damage to the strength of your doorjamb.

You can also consider installing a new strike plate that gives the lock a much more secure grip on the door and requires more force to open it. It usually requires two longer screws to secure the strike plate into the frame of the door. You'll need remove the old strike plate and then drill and chisel the wood to make room for the new one.

This rare strike plate is made from solid brass and has a heavy-duty thickness. It's made to be used on antique rim locks. It comes with wood screws and machine screws, so you'll have the right equipment for your task. Just remember that wood screws have a sharp tip, while the machine screws are more blunt.