• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Maintaining Timber Windows

A well-maintained window made of timber is a significant element of the historical fabric of a building. It reflects in different degree the technology and materials of the time in which it was constructed, the craftsmanship and architectural taste.

Whenever possible repairs to existing windows are required, they should be made in-situ. Repairing the most deteriorated areas of decay can be done by using specialized resin-based systems.

Durability

The windows made of wood in many old structures were designed to last for a long time. They do require maintenance to ensure they look good. Maintenance tasks include sash cord repairs and retightening pulleys for sash and painting. There is also a rising demand to upgrade the timber windows to increase energy efficiency. This can include replacing old glazing units, repairing existing Window and door repair near me rebates or installing new cills to increase the air seal.

The deterioration of paintwork is a major issue with traditional windows. This is especially important when it comes to sash windows, as the gaps between sashes can often be extremely large. In these circumstances water can get into the paint film and cause rotting of the putty and the wood beneath. The rotting may be further aggravated due to weather conditions that are poor. To prevent this, windows should be painted regularly with an exterior wood paint that is suitable.

The areas that are damaged should be repaired using resin-based products. This will ensure that the maximum possible amount of the original fabric is preserved. It is also necessary to limit the number of holes you drill into the frame for cable entry since these could allow water in and cause decay.

The structural movement of the wall can cause distortions in the frame as well as the sash. This can lead to the sash fitting incorrectly, jamming or sticking in the opening, and broken glass. This can be corrected often by putting in new sash frames constructed of slow-grown deal (pine), or oak. The cill must be made of a durable hardwood, like oak, to prevent shifting between the new and old work.

To reduce the risk There are several companies that manufacture Boston pattern wooden sash that will fit most existing openings. They are available in a variety of sizes and finishes to suit the needs of the modern homeowner. These new sash, when coupled with quadruple draft strips and a more efficient thermal insulation, could make a huge difference to the energy-efficiency of a home.

Aesthetics

Many old timber frames have a high aesthetic appeal because they show, in some shape, the materials, technology, and architectural style of the time they were built. They may have significant historical significance in their own right. This is particularly true for early unglazed windows in timber-framed buildings, in which the majority were series of openings within structural frames subdivided horizontally by mullions and vertical iron or wood bars to protect against intruders.

Traditional window joinery made from timber is a beautiful aspect of a building, and is crucial to maintain its appearance. As soon as you notice any decay caused by moisture penetration it is crucial to stop it. This is best accomplished by a thorough painting process, especially in areas in which there is already damage or deterioration. It is recommended to use paints specifically designed to be used as part of a system (primer as well as undercoat, finish and primer) and to follow the manufacturer's recommendations regarding preparation and number of coats needed at each stage.

Wet rot is a frequent problem for old timber windows. The best way to stop it becoming a problem is to take out any damaged or rotten parts as soon as possible to stop the spread of the fungus responsible for it. Replace rotting wood with slow-grown deal (pine) and, when possible, the exact kind of timber that is being removed, to prevent differential movement.

Glass became cheaper and more abundant in the late medieval era and into the 17th century. In the process, glazed openings on timber-framed houses became more complicated with moulded mullions, tracery made of wood and cills that protruded deep. Increasingly, the glazing was placed within frames with rebates and then pinned by 'glazing sprigs' rather than being inserted into lead cames. This method of glazing not only makes windows less likely to leak and also allows larger sheets of glass to be used than would have been possible otherwise without the use of lead lights.

Energy efficiency

Traditional timber windows have a good energy performance due to their thickness and multi-layer construction, as well as attentive attention to detail. They also have large glass areas as well as deep projection cills which reduce air infiltration. With secondary glazing and draughtproofing, windows can be made more efficient to improve their energy efficiency. However it is essential to keep in mind that any such measures should be viewed in terms of the overall quality and appearance of the upvc window lock repair in its original form.

As a result, retaining old windows that require repair instead of replacing them is sensible particularly when thermal enhancements can be achieved cost-effectively through simple repairs and improvements. The windows that are historic have a lot of historical value, as they show a range in technological advancement and changes in the architectural style. The pressures to replace these windows are typically based on the assumption that the old windows will need replacement in the near future, however they are capable of providing service for 150, 200 or even 250 years if they are properly maintained.

It is important to recognise that the decay problems caused by traditional timber windows can be prevented by regular maintenance and timely repairs. It is also essential to identify damp problems and address them promptly so that you can avoid serious damage. The early deterioration of paint is a major problem as it allows moisture to penetrate the wood and cause wet rot. It is not uncommon for this damage to go undetected until the paintwork begins to crack or becomes curly. However, it could cause structural damage and further decay.

A quality paint will block moisture penetration. To prevent mould and condensation it is essential to keep the paintwork as clean as possible. Modern synthetic paints are problematic because they are often water-resistant and can cause mildew to develop in the window frame.

The majority of windows from the past were made from timber that contained the majority of sapwood. The timbers will deteriorate rapidly if exposed to rain, however they can be preserved with a thorough preservation treatment before use. It is crucial to select the right kind of wood for the site and climate, as these factors will affect the durability of the joinery. Local window manufacturers create a variety of timber sash that can be customized to fit specific openings in historic buildings. They can be made to the standard Boston pattern dimensions or to custom sizes that fit with historic buildings.

Maintenance

The life span of windows made from timber can be extended significantly by regular inspection as well as a careful redecoration and prompt repair. The most common reason for decay is the infiltration of moisture through deteriorated putty and paint. This can be avoided with thorough painting and using high-quality wood preservative.

Repairs to old sash windows as well as casement window frames should be done with care and minimal disruption. Repairs can be made to many traditional timber window designs without removing the frame. This should be done as often as is feasible. Remove loose or peeling paint and then lightly sand the surface to improve the "key" of the surface. This will allow the new coating to stick better. It is important to avoid stripping old paint layers that may have historic value and if they are present, it is recommended that a study of the paint be carried out.

When a piece of wood has become rotten the best way to proceed is to remove the rotted material and replace it with spliced-in inserts that are shaped to fit the existing profiles. The timber inserts should be treated with a wood preservative, and the joint between the masonry sub-cill and the timber cill should be sealed.

It can be tempting to replace traditional windows with PVC u, particularly when the installer offers an 'all-in-one' installation which includes both replacement and removal in a single day. It is, however, crucial that the person who installs replacement windows has a full understanding of the construction and history of traditional wooden frames. This will allow them to make the appropriate suggestions for improvements to energy efficiency and other technological upgrades that will not harm the character of a historic building. Window replacements should be registered with a Competent Persons Scheme like FENSA. This will ensure that the replacement windows are approved as a suitable solution in accordance with Building Regulations. It is quite possible for a skilled and experienced carpenter to install PVC-U windows that match the the building originally. This is especially true where windows are installed in listed buildings or conservation areas.