• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Why is My Car Ignition Locked?

There are many reasons your ignition might be stuck. The key could be dirty or may have a damaged wafer inside it. You can fix this by sliding the key in and out of the cylinder several times.

Another possibility is that the pins inside the lock cylinder have become stuck. You can tap the cylinder lightly with a small tack-hammer.

Check the Battery

If the car is in Park or neutral but it doesn't turn on when you insert the key into the ignition, there might be a problem with the transmission shifter switch. You can fix it by shifting the gear shifter upwards or down to put the vehicle into the correct gear.

If the car is still unable to turn, the problem could be due to the neutral safety cable, or the shifter in the transmission. This can be easily solved by a mechanic, or a local locksmith for cars.

The ignition cylinder can also be worn out. Over time both the ignition and key may wear out and become difficult to remove or insert. A lubricant, such as silicon lock grease could solve this issue, letting the wafers slide into place.

The key may become blocked by lint from your pockets and adhesive from tape used to secure packages. This can prevent the key from sliding into the ignition. Clean the key with a cloth or a cleaner such as Triflow, to solve this issue. You should also utilize a spare key in order to determine if the issue is related to the key or the ignition.

While the key is in ignition, you can tap it using a the hammer with a small amount. This will cause a slight vibration that could cause enough friction to loosen the wafers within the ignition, allowing them to slide in place. But, be careful not to harm the ignition cylinder lock repair key or cylinder.

If all of the above options fail, it's probably time to call a locksmith or automotive mechanic to examine the issue. The key may be damaged in the cylinder of ignition or it could be time to replace it altogether. If the problem is with the key the locksmith can make a new one for you. If the issue is related to the ignition cylinder, your car must be taken to a repair shop in order to have it replaced. Luckily, these issues are typically very simple to repair.

Check the steering wheel

A simple issue that could prevent the ignition from turning is the steering wheel being locked. It can happen when an individual driver is unintentionally engaged with the steering wheel while they exit or get into the vehicle. This is usually caused by yanking the wheel and being able to hold it against their body. It could also happen when a passenger in the rear seat accidentally engages the brakes as they exit the vehicle.

This is a simple solution that doesn't require a trip to the mechanic or locksmith. First, ensure that the gear shift is either in Park or Neutral. If it isn't, simply push or pull the shifter slowly until it changes into one of these positions. You should also activate the handbrake or press the brake before turning the key.

If the wheel isn't locked a quick look at the steering column will show whether the key has been engaged with the lock. This is typically marked by a tiny "Lock" label in the lower area of the ignition circle. You can easily disengage this by gently moving the key or pulling it with moderate force. It is essential not to use too much pressure as this could cause damage to the key, or damage a wafer inside the lock cylinder.

Another option is to use an additional key to determine if it can disengage the lock. This may indicate that the original key has worn out and no capable of engaging the wafers inside the lock cylinder. A professional at Karl Chevrolet Webster City can create a new key if this is the case.

If the new key isn't engaging, a quick spray of penetrating oil can aid. Apply a small amount of penetrating oil around the keyhole and ignition. Then, jiggle the key or tap it lightly to make sure it is working. If this does not work you, you might need to consult a specialist in your local car dealership. They'll be able provide you with a replacement key and replace the ignition cylinder, if necessary.

Check the Key

It could be that your key may be damaged if it does a new ignition switch require a new key not engage in the ignition. You can try getting rid of any foreign material that is on the key (lint and adhesive from packing tape, etc). You can also try rubbing alcohol on the key or Goo Gone to see if it helps.

It is possible that the lock pins inside aren't moving correctly when you insert the key. You can test a spare key by gently pulling it out of the ignition after you put it in. You should be capable of hearing and feeling the pins moving within. If you don't feel any movement, you could lubricate them with graphite powder. You can buy graphite in small tubes that can be squirted into the keyhole. This will help the pins slide into place as you insert the key and stop them from becoming stuck.

A more serious problem with your key may be that it has become worn or damaged, making it unable to engage the internal pins of the ignition cylinder. This may cause the ignition cylinder to stop turning and prevent you from starting your vehicle. In this situation, you'll need to bring your car to an auto repair shop or locksmith to get service.

If you're able to turn your car with a spare key and you've ruled out any issues with the steering wheel or battery, it is possible that the ignition cylinder is worn out. You can try to loosen the lock by using a blunt screwdriver or a handle of smaller hammers. Do not use the head. A gentle tap on the cylinder will often free it which allows you to turn your key and start your vehicle. If this does nothing will happen, you'll have to get your lock's cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is where your key slides in and out when you insert it. Often times, it gets filled with debris or is a result of regular wear and wear and tear. Try putting some silicon lock lubricant (like WD-40) into the ignition to make things move forward.

You can also use the small hammer and tap very gently on the inside of the ignition to try to loosen or reset pins that are not aligned. Be cautious not to overdo it or you may cause severe damage to the ignition switch.

It is crucial to confirm that your car ignition lock's transmission is set to neutral or park before you attempt this. Many modern cars have the ability to lock the steering wheel when it is not in park or neutral that can stop the key from being turned in the ignition.

If you've done all of this but not able to get your key to rotate it is most likely that the housing of your ignition cylinder requires replacement. Different vehicles have different methods of replacing the ignition cylinder, so it is essential to follow the correct procedures.

Generally speaking, this involves removal of the plastic cover which is placed over the steering column and ignition assembly. To remove this, you will need to first adjust the tilt-wheel to the lowest setting and then remove any fasteners that are holding it in place.

After removing the cover, you'll need to remove the old ignition cylinder from the steering column. Then, you'll need to check the new ignition cylinder that you purchased with the one that was removed to confirm that they're identical. Once this is done the new ignition cylinder is able to be installed in the same manner that the previous one was removed.

It is possible that even with our best efforts, the ignition could be damaged and require to be replaced. If this happens, it is advised to contact an Tempe Locksmith for assistance. A locksmith will be able to assist you in selecting the right replacement and then install it correctly, so that your car ignition lock will be able to start up again.