• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Replace the Replacement Key Battery For the Saab 9-3

saab replacement keys uk replacement key programming (go here) owners have a distinct set of steps to add an additional key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then a new key and transponder are required to be purchased and programmed to the car.

Rotate your keys to prevent one from wearing out quicker than the next. This will keep your keys in perfect condition.

Replacement Case

The new key fobs are not like the older Saab keys. They are equipped with electronics that make them difficult to duplicate. This has made car theft much more difficult than it was just a few years ago. However, it has also made the replacement of lost keys a more expensive endeavor.

Every owner of a Saab 9-3 needs to have at minimum two working keys. If one is lost, it costs a fortune to get another one for the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers will typically charge $100-$200 to do this.

There are ways to cut down on these high costs. Some parts retailers can look up the code on an old key (usually the same one that opens the doors and turns on the ignition) and cut a new key blade from metal for only a fraction of the dealer's cost. The key, however, must be identical to the original one in order to function within your car.

Follow these steps to replace the case. You'll require an open-faced screwdriver and a lot of patience. With the screwdriver slowly pull the plastic apart and separate the emergency keys from the case. Once you have the case open, remove the electronics and place them inside your new case. Be sure to put the correct key and badge back inside the case, too.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This video tutorial on DIY from YouTube Cyclone Cyd, a user on YouTube, explains how to replace the remote key fob battery in just four steps. This guide should work with any modern saab key programming-type key fob, though the process may vary slightly.

The first step is to find the button that opens the backup key inside the fob. It is usually located near the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole on this button. This should be enough to open the fob case in order to change the battery.

After you have installed the new battery CR1632, you are able to put back together the remote key fob. You can then program it into your car. The procedure should take no more than an hour, if not less. It's a very easy process that does not require any special equipment.

The process is a bit more complicated if you lose your key, but it's possible. The dealer has to verify the VIN of the car, and then request a replacement saab 9-3 key key blade and TWICE module, both with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car. It is equipped with an internal battery. The batteries have a lifespan that is a long time, and they eventually fail. It's a common issue with all cars. The good thing is that you can change the batteries in most key fobs, and not have to replace the entire case. Amazon sells replacement fobs with all the electronics installed. You can simply remove the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, insert the screwdriver of a small flat head into the slot in the middle of the. Use the screwdriver to move around the case until it is split open, making it easy to take it out.

If you're ready to replace your keys, have a spare in your possession. This will save you a significant amount of money. If you have a spare, you can ask the dealer to cut an additional key and program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add another key to your vehicle if you don't already have one, however it requires an extensive amount of research and effort. A second key can cost several hundred dollars and also requires programming of the car's computer. Professionals can do this, but it's an expensive option.

Replacement Ignition

Contrary to the earlier Saab automobiles, the current saab 9-3 key fob programming 9-3 models are equipped with a much more sophisticated alarm system that is based on a coded key. This means that if you lose your only working key, replacing it with another key can be extremely expensive because the car needs to have a special computer module installed, and it must also be specifically designed to accept a different key. Dealers can charge hundreds of dollars to program the new key in the event that they are unable to complete the task.

If you've lost only one working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to make a replacement, and they will charge you the highest price for it. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for a replacement key, which will save you more than 50% of the amount you be charged at a dealership.

If you've been a long-time owner of a 03-11 saab spare key 9-3, you probably have noticed that the ignition switch isn't all that durable. They can be extremely sticky and the buttons can fall off of them at times which is why you should think about buying a new one if the one you have isn't working as it should. Luckily, replacing the ignition key isn't as complicated as it sounds, and it can be done fairly quickly with the right tools.