• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you might require having the key fob programmed by an auto locksmith. This is typically accomplished by connecting a programming machine to the computer in the vehicle.

To program your Subaru begin by opening the driver's side door using the door button control, then close it. You will hear a chime from the instrument panel, and the dome lights will blink.

Step 1: Find the Transmitter Circuit Board

There are a variety of ways to program your key fob. First, you must determine the kind of key fob you have. You can determine this by taking a look at the key fob's shape or by listening to your car for a sound.

Once you have this information, you can start the process of programming your key fob at home. To do this, you will need a metal key and a screwdriver with a flat head. Open the key fob case by twisting it. Then, push the metal key into the case and then release the battery from the tiny tabs which hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the batteries in key fobs in case they're not working. In some cases buttons on the key fob could be broken. If you notice the metal contacts on the button have come loose then you can try soldering them back in place in order to make them function again.

Before you start the process, ensure your car's doors are shut and the ignition is turned off. You can do this by closing the driver's side door and pressing your door button ten times in rapid succession. Then, you'll hear the instrument panel chime, and the dome lights will light up. This indicates that you're prepared to move forward.

Step 3. Insert the key fob into the ignition

A lot of articles on the internet will tell you how to program your new or replacement subaru key subaru remote key replacement keyfob at home. However, many of them do not give precise instructions. A professional auto dealer or locksmith in Fort Bliss is the best option to reprogram subaru key an electronic car key.

Sit in the driver's seat of your Subaru with the engine turned off and the doors closed. Use the door button to unlock all the doors. Open and close the driver’s door three times. After that, insert and remove your key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have changed.

Step 4: Turn the Ignition On

Before you begin this process of key fob programming, it is important to keep in mind that this process only works if you own one working key already. If you do not, then a dealership or auto locksmith will be required to program a brand new key for your subaru key car in Fort Bliss.

Once the key is programmed, it will be capable of starting your vehicle in about 5 seconds. Start by closing all doors and shutting off the engine. Then, sit in your driver's seat and unlock all doors using the door button control. Insert the key in the ignition and then turn it to the first position. The electrical systems will be activated, however the engine will remain off. Repeat this procedure 10 times.

Step 5: Unlock Driver's Door

Subaru offers a wide range of luxury automobiles equipped with key fobs that lock and unlock doors, turn on the engine, and defrost windows. However, sometimes, these devices aren't working as they should.

To resolve this issue, you should contact an expert locksmith or dealer. This will resolve the issue and ensure your vehicle is safe.

To do this, you must open the door to the driver's side and close it. Then, insert the ignition key in and switch it to the initial position. Then, return it to the off position. Repeat this ten times the row as fast as you can. After tenth attempt you will hear a chime.

Step 6: Press the Lock/Unlock button on the driver's Door

The procedure to replace a battery in a Subaru remote key fob is simple. The first step is to open the exterior fob casing. Then then, use an flathead screwdriver, to pry into the case's interior and remove the old battery.

After removing the battery, insert the new one and close the case. Next, sit in the driver's seat, and unlock all doors using the door button control. Place the key in ignition and turn it so that the electric system is on, however the engine is off. Repeat this ten times in succession until you hear the chime coming from the instrument panel. This will turn the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

The annoying chirp that can be heard when you lock or unlock the subaru car keys Key Fob from outside of the vehicle can be a distraction for some owners. In certain situations the chirp can be turned off by closing and opening all doors and a double-click of the lock button on the key fob.

Switch off the ignition and close all doors and the fuel-filler lid. For 10 seconds pressing and holding the lock button on the key fob. The instrument panel emits a chime when this is done. The chirp signals that the lid of the fuel filler and door are locked. The setting can be changed to make the doors and fuel-filler lid lock automatically without having to press the request switch.

Step 8: Enter the 8-Digit Transmission Number

Write down the first series of 8 digits and keep it in a safe place. Then, sit in the driver's chair, close the doors and turn the key to the first position. After ten turns, your instrument panel will chime once.

The circuit board for the transmitter is within the key fob case. The circuit board should contain one or two 8-digit numbers. Follow the steps in the guide to register the code. For older models, this procedure may require a visit to the dealer.