• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that will help the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards will fall on the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close your window and do an initial test fit. The corners of the sash should align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. The most common cause for leaks in Upvc window repair windows is that the sealant around the frame is either damaged or not present.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. If they are beyond repair, it could be required to realign them. Second, the interlock can be misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace these.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as possible.