• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Double Glazed Window Repair

Double glazing is an energy efficient investment that reduces heat loss in the winter months and helps keep your home cooler during the summer. Repairing your double-glazed windows when needed is a great way to ensure they remain in good condition.

Over time condensation and misting may affect your double-glazed windows. Double glazed windows may be difficult to open and close.

Broken Panes

A ball that is rogue, a flying stone from your lawnmowers or a strong storm can shatter your double-pane windows, leaving you home vulnerable to the elements. While a damaged window may be difficult to fix, you don't have to have it replaced entirely. In fact the insulated glass that is between the two panes remains in good shape and you can fix your double-pane window using a little DIY effort.

First, you'll need to take any broken glass from the frame. This can be an unpleasant task, and you'll want to be cautious to prevent any glass shards from falling on the floor or slipping out of the frame. Wear work gloves to protect your hands, and place a rag around the broken glass to avoid any further injury or cuts. After removing the broken glass, carefully clean the entire frame of the window to get rid of any sealant residue and debris. It's important to smooth rough areas of the frame to ensure a smooth surface for your new glass.

After the frame has been cleaned, you can apply a new layer of glazing to the place where the damaged pane was removed. This is the most effective way to ensure your window stays secure and sealed and will aid in reducing energy costs by stopping drafts and water from entering your home. Next, you will need to select your glazing material. There are a variety of options, including clear tape which is more durable than regular tape and will keep your window from further cracking, as well as glazing film that is similar to clear plastic wrap. This choice has the benefit that it can be painted to match your frame and will also block out the elements like ice and rain.

No matter what material you decide to use it's essential to press the glazier's points into the gap where the putty meets your frame. They will help keep the glass in place, and aid in adhering to the frame. The glazier's point can be found in hardware stores, and they come in pre-made ropes that you simply roll out onto the frame rabbets.

Condensation

If you have a problem with condensation, it's best to contact your window manufacturer. Many companies offer warranties and guarantees to cover the problems. Fogging and condensation between panes of glass is a clear indication that the seals between your windows are damaged and can only be repaired by a professional who will replace both panes.

It is a tricky procedure that requires specialized tools to remove and replace the window. A professional can handle this job and provide the tools. Making use of these tools can be dangerous it is best to leave this kind task to an expert.

Wear safety gloves and glasses if you opt to do it yourself. You may be exposed to flying glass fragments. It is also important to remove all the putty and metal glazing points from the grooves where the new window will be. You should also brush the frame with wire, and then vacuum or wipe with a damp cloth. After the frame is dry, you'll need to order another piece of glass that is 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.

Based on the frames you have You will then have to apply a thin layer of silicone caulk to the grooves to ensure that your new pane is securely in position. After the silicone caulk has dried, you can smooth it out and make any adjustments. The wood molding will then be reinstalled.

If the weather suddenly changes, double-glazed windows could become difficult to open or close. Extreme temperatures can cause frames of double-glazed windows to expand or shrink, causing them to slide and become stuck. You can try wiping down the frames with water and lubricating them if this is the case, but it may be better to consult the company who installed your windows.

Misted

Misted Double Glazing is a problem with windows that occurs when moisture gets trapped between the glass panes of your double glazed windows. Double glazing is made up of two panes that are separated by a space that is filled with argon for greater thermal efficiency. This creates a airtight seal that keeps warm air inside and cold air outside.

This seal can become damaged over time and moisture may build up between the panes of glass which can cause them to turn to appear misty. This happens because the space between the panes is heated by the sun, causing water vapour to build up in it.

This is a natural occurrence, but if it occurs between the panes of the window it could cause problems because it won't be able to regulate the temperature within the room. Instead the temperature outside the window will influence the temperature inside. If you notice that your double-glazed windows are turning blurred, call the experts at Northfield Glass to investigate.

We can replace a single sealed unit, without the need to replace the entire window. This is much more streamlined than a total replacement. Our misty window repair involves taking off the glass unit, cleaning it, and then replacing it with a fresh one to create an airtight seal.

Some companies in the field claim to inject chemicals through holes drilled into windows with mist to remove the condensation and fog. We don't recommend this method. This is not just unattractive, but it could also damage the toughened glass and result in a window that does not completely function.

It is essential to address the problem as soon as possible, as left untreated, it can result in the growth of mould, which not only damages the window but also poses health risks to your family. Moisture can also cause other issues in your home, such as dampness or rot. In some instances the window might need to be completely replaced.

Blown or Failed

Modern double-glazed windows come with two glass panes, with an inert gas or air in between them. This increases their thermal efficiency by keeping heat in and cold out. Over time the gas may become depressurised and cause many problems.

One of the most frequent is condensation occurring between the panes. It's not a sign of a window failure however it could be a sign you should replace them. Condensation may also be a sign that your double glazing has failed in which case it should be replaced completely.

Double-glazed windows can also cause drafts. This could be because of an unsound seal, a broken handle, or a broken lock. A draught can be quite obvious and result in more expensive heating bills It is therefore essential to get it fixed sooner rather than later. You can test the seals by placing your finger around the edges of your window frame to determine whether you feel cold air.

You will also notice water beads on the inside of windows when your window seals aren't performing as they should. This is a sign that you will need to replace the seals on your double-glazed windows.

Your window frames have been designed to move slightly in order to keep the glass sheets in position. As time passes, this particular packaging material may become compressed. This could cause the seal to be broken. This will allow the air to move between the panes, reducing the energy efficiency of your window.

A blown seal is a clear sign that your double glazing has failed and needs to be fixed immediately. A damaged seal will stop your double glazing from performing its primary job of keeping cold out and warm inside. In addition, a blown seal can let moisture in, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist as soon you spot a damaged window seal. They can repair or replace the entire unit.