• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Allowing your cat to enter and go out of the home at its own pace is a great idea to keep it mentally and physically active. A flap can reduce accidents with toilets by making it easier for your cat to leave the house if needed.

Take a look at the Door

A cat flap lets your pet come and go whenever they want without having to open the door. This is ideal for keeping them in when you're at home or away and helps keep unwanted pests out of your home as well!

It is essential to measure the door prior to when you buy a cat flap as there are fitting a cat flap variety of sizes available. You should then make sure that the cat flap is the correct size for your upvc doors. Otherwise, it could be too large or small and your cat might have difficulty using it.

Take a ruler, and measure the width at several locations along the edge of the door. You should also take measurements of the door's height in a few places. A door that is too high will make your cat do an acrobatics routine each time it is tempted to use the flap.

Get help from a glazier if you aren't sure what to measure for the door. They'll be able assist you in determining whether or not your door is suitable for Fitting a cat flap in a upvc Door cat flap, and advise you on the right size of flap to buy.

When you've got your measurements, the next step to do is to mark the shape of the hole on the door. This will assist you when you're cutting the hole and save you money!

You should also make sure that the hole you're creating is in the correct place. For instance, if you're installing the cat flap on a patio door, it is important that the hole doesn't sit too close to any hinges, since this could cause leakage and issues with the seal.

If you have glass doors you could want to let this job to a professional glazier. It may be difficult to fit a cat-flap into an existing pane. You may also find that it cracks and loses its weatherproof seal.

Measure the Cat

A cat flap double glazing flap permits your pet to go and come whenever they want without needing to leave them alone. It can also help to stop the draughts from entering your house, which aren't good for you or your cat!

If you own a uPVC door or composite, it might be difficult to install the cat flap. These types of doors are often made from different materials than traditional wooden or replacement upvc door panel with cat flap doors, and the installation process is quite different too. Make sure to inquire with the manufacturer to see if it is compatible before you install an uPVC cat flap on your uPVC composite or uPVC door. Changes to the door could be detrimental to warranties.

Generally speaking, these kinds of doors are made to be tough and durable, with insulation built in. They are more resistant to the weather than other types of doors, but it isn't always easy to install the cat flap. Get advice from a professional before installing a cat flap on a uPVC door or composite.

You'll need to take their height in order to ensure they fit through the door. This is easiest when they're asleep or calm so that they aren't moving around too much. Once you know their height and weight, you can determine the distance between their stomachs and the floor in order to determine the position of the bottom of the flap. Then, you can mark this position on the door.

When using power tools to cut your uPVC door or composite door, you need be cautious. Cutting into metal can cause cracks, particularly if the area is composed of toughened glass. This is why it's recommended to engage an experienced glazier when putting your cat flap cost flap inside the glass pane. This will stop the glass from breaking and becoming fragile. A Glazier is also in a position to provide you with a circular cat flap that is less likely to break and safer for your cat to use.

Cut the Hole

If it doesn't, you can make one yourself with a sheet of paper that is thin (tracing paper is ideal). If it doesn't, you could create your own by using a thin sheet of paper (tracing papers are ideal). After the shape is drawn on the door, then use your spirit level to make sure that the design is horizontal. This will ensure that your cat flap sits properly in the door, and it will not open or close.

Then, you can use your jigsaw to cut out the pattern that is marked on the door. Make sure that you are using a blade suitable for use on uPVC doors - usually it will be marked as such If not, ask the staff at your DIY store for assistance. Once you have the hole drilled and the flap section is in place, put it against it and then push it open to ensure that the action of the flap is smooth. If it becomes stuck at any point, use the filer or the rasp to fix this.

You should also check whether there are no electrical gas or cable lines within the door that you will be cutting into because they could be damaged by your Jigsaw. Similarly you should be aware of any handles or other fixtures on the door that will have to be removed in order to make room for the cat flap and be cautious not to scratch them during this process.

The majority of people who install a cat flap on their own have an ordinary solid uPVC front door, so they will not have to face these problems. But, if your door is made from timber or has decorative panels that cannot be removed, it will add to the complexity of the job.

For these types of jobs, it's recommended to seek out expert advice from a cat flap installer flap fitter. It is crucial to complete the job correctly to avoid future problems. It is essential to get it right as getting it wrong could damage the door and void the warranty.

Place the Flap

Once you have cut your hole, put the flap to check whether it opens and fits well. If you find any points which catch or stick to the wall, use a hand file or sandpaper, to file them down until they fit properly and can be opened without issue. Make sure the flap sits flush with the door too.

If your tool doesn't have templates, you can use thin paper like tracing or Acetate. Place the paper on the door, and draw a line in order to indicate where the flap should be placed (this will serve as your cutting guide). Make four screw holes at each corner of the flap with the pencil marks you made on the door. These are the screw points that you'll need to use to fix the flap in place.

Most uPVC doors are strong and therefore easy to cut into. If your door is constructed of GRP or composite the process can be more difficult. If you're not experienced in this area, it might be wise to get a professional to do the job for you. They will also be able to tell you if your door is suitable for the installation of an animal flap.

If you are planning to install a cat flap on composite doors, you need to first consult with the manufacturer or a professional joiner. Any alterations made to the doors could cause the warranty to be void. If you decide to do the work yourself, bear in mind that this can be messy and could be dangerous.

For composite doors, you'll generally require a grinder or saw to cut through the door's panel instead of just cutting through the GRP. This is a potentially dangerous job, and you'll require extra care to ensure that the door is not damaged. It's also worth noting that cutting a hole in any kind of glass door is far more difficult than making the same change in a uPVC or solid wood door.