• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Fix a Loose Door Hinge

Repairing a broken door hinge can be a manageable task for the majority of homeowners. If the screw holes are shattered and do not hold screws, you may require dowels and wood glue to put back in the hinge.

Clean up any surface rust. This will allow the dowels to stay in place and give them a solid foundation to hold onto.

Removal of the Hinges

Most hinges on doors are removable, which makes it easier to move the door from one side to the other or take the entire door off the frame if need be. Anyone with a little patience can remove the hinges but you must be aware of what to do.

If the hinges have been painted you'll need to take off the paint before you attempt to remove the pins. You could scratch your door if you do not remove the paint. Place the hinges in a stainless steel pot and fill it with water to the point that the hinges are completely submerged. The hinges should rest in the pan for about 30 minutes. The heat from the water should soften the paint and make it easier to get rid of the pins.

Once the pins are loose, remove the hinges and the frame from the patio door hinge replacement. It is possible to use a regular screwdriver, however it is recommended to use a magnetic screwdriver for this task. This type of screwdriver is designed to pick up screws made of steel and can make the work speed up.

Before you attempt to remove the hinges, it is recommended to spray them with oil. A simple lubricant will help the process go by more quickly and make it easier to remove the pins and screws. You can find this type of lubricant in most hardware and home improvement stores.

The number of hinges required will also vary depending on what type of door you have and how it's installed. aluminium hinged doors with solid cores and heavy weights will require more hinges whereas hollow-cored doors that are lighter may only need two or three.

Understanding the different types of hinges can help you decide which one is the best for your particular situation. The hinges on the exterior are designed to support the weight of the door and interior hinges need to be able to handle lighter loads.

Reattaching the Hinges

Over time, the hinges of doors may become loose and start to slide or hang crookedly. This can be a problem, but it's usually easy to fix door Hinge. Most of the time it's a simple tightening of the screw will resolve the problem. If the screw holes have been stripped out, it can be difficult to fix. Fortunately, there is a trick to get these holes tight again that utilizes a wood dowel.

Begin by drilling the old hole using a drill bit close to the size of the new screw (normally 3/8"). Fill in the hole using wood glue and a wooden stick. To ensure a secure fit, the dowel must be cut to the same length as the screw. Then, reinstall the screw and tighten it until the desired degree of tightness. If the door has the tendency to be bowed, then add another dowel to the gap and repeat the procedure. Close the door slowly after each adjustment to ensure the clearances around the perimeter are correct.

You could also use a wood plug in place of the dowel. It will work equally well, but may take a bit longer to put in. You can use a piece of wood that has been whittled to the proper size. If you don't own an instrument for woodworking, you can use toothpicks or matchsticks made from wood.

After you have reinstalled the new screw and countersink the screw, you can use a countersink tool to make the hole for the head of the screw smaller, so that it doesn't touch the edge of the door when it's opened and closed. This will aid in tightening the screw when you are reinstalling the hinge.

After you have reinstalled the hinge, be sure to coat it with a dry lubricant to prevent it from getting stuck in the future. You can use products such as PB Blaster and Liquid Wrench. You should apply a thin coat and give it approximately 15 minutes to reach the hinge barrel.

Refinishing the Hinges

If you're not yet ready to replace your hinges, try a few simple fixes. The first step is to make sure that the screws holding the hinge plate to the frame and door are tight. If they're loose, tighten them with the help of a screwdriver or a power drill. Be cautious not to tighten the screws so tight that they create gaps at the trim joints or, even more damagingly cause threads to be stripped.

If the problem is the hinge plates are breaking they can be reattached to the plates by putting wood glue to the back of them and then inserting wooden dowels or toothpicks in the holes. Dowels and toothpicks provide a solid foundation for the screws, which will stop the plates from shifting as you drive them in. Allow the glue time to dry before reattaching the hinge.

The screws may also be stripped or missing. It is possible to fix this issue by replacing the screws with larger ones. Make sure you use a drill bit that matches the size of the screw hole to avoid drilling into other parts of the jamb or hinge.

Close the door once you have reattached your hinge and check the gap between the frame and the door. The gap should be about the thickness of a penny all around or less if the old upvc patio door hinges was hung incorrectly. This shouldn't be a problem as long as the hinges are correctly installed.

If the hinges seem loose, you could add an extra thick hinge between the hinge plate surface and the mounting surface. This will give the hinges more space. You can also remove the hinge pin and pound it down with a hammer in order to tighten it up or choose the hinge of a different type. It is also possible to lubricate the hinges using mineral or jojoba oil to reduce friction and help them hold their place. Lubricating your hinges periodically can stop them from becoming stiff and squeaky, and also extend their lifespan.

Cleaning the Hinges

A hinge's continuous movement creates friction, which attracts dust particles. These particles can get stuck and accumulate over time in the moving parts of door hinges, if they're not cleaned and lubricated regularly. As a result the hinge becomes stiff and creaky and its appearance may deteriorate rapidly. Regular cleaning, lubrication and inspections can maintain the integrity of a door's pvc window hinges and ensure their proper operation.

Check the hinges to see how much rust has built up on their surfaces. If the rust has corroded to the point of destroying the surface of the barrel or screw holes, you will require replacement of the hinges. If you can save the hinges, clean any loose rust using steel wool and wire brush. Then apply an industrial rust remover or a homemade solution, such as lemon juice to the hinge. Allow the rust remover to be on the hinge for a few minutes to dissolve and penetrate any remaining rust.

Retightening screws can restore hinge functionality if you don't want to spend money or time to replace hinges. If you have stripped the screws, however, it may be necessary to add an wooden dowel or shim to the hinge. Wooden dowels are round pieces of wood in the form of rods which are available in different lengths and diameters. They can be purchased on the internet, at stores selling woodworking supplies and home improvement centers.

You can also create an shim using made of plastic or metal depending on the type hinge you are using. To make a dowel cut a dowel from wood to the desired length. You can dip the dowel in carpenter's glue and then insert it into the hole. The glue will hold the dowel firmly in the desired position.

Before cleaning the hinges, put down a piece of paper towel or cloth to protect your flooring from spills. After the area is secured and dry, clean the hinges using a soft cloth or sponge that has been soaked in mild cleaner or vinegar to remove built-up dirt, grime and tarnish. A small or toothbrush can be used to reach difficult-to-reach spots in crevices or narrow areas.