• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Sash Window Repair

Sash windows can be out of balance and even break. Pam browses the internet for wavy glasses that are salvaged and keep an eye out for discarded sashweights made of metal. She then seeks replacements in the form of washers or nuts to help balance her window.

Pam will set each pan by putting the glazing material in a rope into the rabbet groove or pocket around the opening. This reduces drafts and expensive heat loss.

Sashes that stick Sashes

If your double-hung windows get stuck in the middle, it's a nightmare. They'll rattle during storms and you'll lose your view. A window that is too loose may allow in external noise and air which can increase your energy costs. Both scenarios are not optimal but they can be fixed by using the proper tools and persistence.

A common issue with old windows with weighted sash is that paint could get sucked into the channels that they slide over, causing them blockage. Most of these problems can be resolved by cleaning and oiling the tracks.

Begin by removing the caulking that was between the window stop (the internal one) and the window frame. Then scrape off any accumulated paint. Make use of a sharp knife, and place sheets of plastic as well as a dust-collecting vacuum cleaner below the surface to collect any paint dust or chips.

You can then clean the tracks using a dry cloth, then apply a silicone-based lubricant that will help them slide better. You can find this in most home improvement stores, or on the internet. You can test it by moving the sash upwards or downwards.

If it is still jamming it could be due to a problem with the sash cord. Check to see whether the cord is catching or hanging from the sash, or has snapped completely. If this is the situation, you'll need to reconnect the window.

A pin that holds the rail in place might have been ripped out. This can be tricky to fix, and you'll need to call an expert in the majority of instances.

If a pin doesn't fall out, but the wood has become swollen or warped it's a good idea use a wood hardener on it. It's a fast drying liquid that can aid in restoring damaged wood, and you'll be able to repair your window without having to remove it completely. After using it, you can pry apart the two sashes by placing a piece wood in the lower corner of the window where they meet.

Draughts

Draughts can cause problems with sash windows that are old, especially during the winter. They are often caused by decaying wood, cracked putty or worn cords for sash. This causes cold air to get inside the window, making it difficult to warm your home. There are some options you can take to help prevent draughts in your sash windows, such as filling any gaps with foam that expands or strips to block draughts that you can buy at most hardware stores. They can be very efficient, but they will need to be replaced from time to time because the foam expands and wears away with use.

A alternative that is more durable is Gapseal, which is a rubbery spongy seal that you can cut to size and put into the gaps between the window frames of your sash. It can be used on its own or in conjunction with adhesive strips on the bottom and top of the frame. This option is fairly expensive and will need to be reapplied over the duration of your window's lifetime but it does offer a long-term solution and is easy to remove when you wish to open the window.

Cling film can also be used to stop draughts. Simply roll it up and then insert it into all the gaps around your window. This is an effective draught stopper but the downside is that it could stop sash movement completely and pose a fire hazard. The sash needs to be removed in order to reopen the window, and the clingfilm must be to be reapplied each time the sash is closed.

A better option is to have your windows draught-proofed as part of a comprehensive refurbishment service. This could include the replacement of sash cords as well as staff beads, parting beads, lubrication for the pulley wheels, and rebalancing the weights, in addition to painting or staining the frames and sashes. This will bring the sash back to its original purpose and improve its energy efficiency and correct any minor flaws in the wood. It is less disruptive than removing windows and can help reduce draughts, increase thermal performance and significantly reduce the cost.

Decay

If your windows with sash have suffered damage or decay the good news is that they aren't necessarily damaged beyond repair. The frames of these windows are generally constructed of high-quality wood. With the right restoration, they can be restored to give you the best performance for many more years. The key is regularly checking the frames and making sure that the wood is well ventilated to prevent the accumulation of moisture which can lead to wood to rot.

Most of the problems you will encounter with sash windows will be readily apparent on close visual examination, however certain issues are more difficult to identify. Particularly, wood decay is a very difficult problem to treat because fungus can eat away at the wood. It is possible to fix wood that is rotten, but the best way to avoid further decay is to ensure the wood is kept dry.

First, clean any paint from the hardware. It may be necessary to remove the bottom rail from the frame, and also the rail that joins it (this will depend on the position of the sash). The "pocket covers" are tiny pieces of wood placed on the frame's side, which allow access to the weights, should be removed. It is possible to use a sharp knife to remove them if they're attached by nails or paint. After the pockets have been removed, you can start chiseling out any wood rot and apply an excellent, water-resistant filler. Once the filler has dried the primer must be applied to protect against further decay.

It is a smart idea to check inside the window for sashweights to ensure they are properly balanced. They should not be in the wrong alignment or pulled one side more strongly than the other. The sash may be thrown off its track if they aren't balanced. This could cause the frame to break or become damaged. You can replace the sashweights by new ones or install an entirely new balance system to stop the sash from swinging the wrong way.

Poor Security

Over time, sash windows can become exposed to the elements and prone to deterioration from weather and general wear. This can lead to the decay of timber, and will require replacement. Water marks on the window or on a softened frame could be a sign of decaying wood. It is essential to speak with a professional to assess the situation, and determine if sash window repairs are necessary.

In time the rails on the bottom may also be damaged. Water marks on the sill or a window repairs near me which is soft to the touch can be an indication of this. A professional is required to evaluate the situation and recommend any replacement of the sash window's seal or replacement.

It can be a real concern when triple or double windows are glazed and start to allow noise pollution back into the house. If this happens, the structural integrity of windows' sash could be at risk, and they will most likely require to be replaced with an alternative option.

A common sash repair problem is when the sash gets stuck in the frame. This could be caused by an untidy cord or problems with sash rattles. If the issue is related to the sash ratchets, a little gentle persuasion is often the best solution.

This issue can be fixed by taking the sash off and cleaning the tracks. Once the tracks are clean take off any security fittings that might be present, and then taking off the sash cords and chains will allow the sash to be removed. The staff bead can be sealed with a draught-proof seal that will reduce the risk of draughts. This will also improve the finish of the paint. Decorators caulk can be used to fill the gap between the sash's sash box and the sash. This will enhance the operation of the sash and decrease the possibility of draughts.