• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Why is My Car Ignition Locked?

There are many reasons your ignition may be stuck. The key may be dirty or have a broken wafer in it. This can be fixed by sliding the key into and out of the cylinder multiple times.

Another possibility is that the pins in the lock cylinder are stuck. You could tap the cylinder lightly using a small tack hammer.

Check the Battery

If your car is in Park or neutral, but won't turn on when you insert the key into the ignition, there might be an issue with the shifter switch for the transmission. You can fix it by shifting the gear shifter upwards or downward to get the vehicle into the correct gear.

If the car doesn't turn, the issue could be due to the neutral safety cable, or the shifter in the transmission. They can be fixed by a mechanic or by a local automotive locksmith.

It is also possible that the ignition cylinder is worn out. Over time the ignition as well as the key can wear out, making them difficult to insert or remove. A lubricant, such as silicon lock grease can address this problem, allowing the wafers slide into place.

The key may become blocked with lint in your pockets as well as adhesive from tape that is used to secure packages. This prevents the key from sliding into the ignition. To fix this issue, you can try cleaning the key using a cloth or using a cleaner, like Triflow. It is also recommended to use a spare key to see if the problem is with the ignition or the ignition cylinder lock repair.

You can also tap the key with a small hammer while it's in the ignition. This can cause a slight vibration that could be enough to loosen up the ignition's wafers and allow them to slide into the right position. However, you should be cautious not to harm the ignition key or cylinder.

If all of the above options fail, it's likely to contact a locksmith or automotive mechanic to have it looked at. It could be that the key has been damaged inside the ignition or it could be the time to replace the whole thing. If the issue is with the key the locksmith can make a new one for you. If the cylinder for the ignition is the cause, you will need to bring the car to a repair shop in order for it to be replaced. Luckily, these issues are usually very easy to fix.

Check the steering wheel

A common issue that can hinder the ignition from turning is a locked steering wheel. This can happen if the driver accidentally engages it while exiting or enter the vehicle. It is typically caused by pulling on the wheel while balancing themselves against it with their hands. It can also happen when a passenger in the back seat is unable to stop it when they exit the car.

Luckily it's a simple fix and does not require a trip to an expert locksmith or mechanic. First, ensure that the gear shift is either in neutral or Park. If it isn't, simply push or pull the shifter until it moves into one of these positions. It is also essential to press the brake or turn on the handbrake prior to trying to turn the key.

If the wheel is not locked, a quick examination of the steering column will determine if the key is engaged with the lock cylinder. This is usually identified by a small "Lock" label in the lower area of the ignition circle. It is easily removed by gently jiggling it or pulling it back with moderate force. It is important not to use too much force as this could damage the key or tear a wafer from the lock cylinder.

A spare key may also be used to disengage the lock. This may indicate that the original key is worn out and is no capable of engaging the wafers that make up the lock cylinder. A professional from Karl Chevrolet Webster City can make a new key if this is the case.

If the key doesn't engage after spraying penetrating lubricant, it could aid. Just apply a small amount of oil around the ignition and inserted keyhole, then tap or jiggle it until it starts to work. If this doesn't work you, it's possible to speak with a specialist at your local dealership for cars. They can supply you with a new key and can also replace the ignition cylinder if needed.

Check the Key

It is possible that your key has been damaged if it will not engage in the mobile ignition lock repair services. You can try getting rid of any foreign material that is on the key (lint or adhesive from packing tape, etc.). You can also try rubbing alcohol or Goo Gone on the key to see if it aids.

It could be that the internal lock pins aren't moving correctly when you insert the key. If you have an extra key that you want to test, try putting it in the ignition and gently pulling it out. This should let you hear and feel if the internal lock pins move, as they ought to. If you can't hear or feel any movement, you could lubricate them with graphite powder. You can purchase graphite in small tubes that can be applied directly to the keyhole. This should allow the pins to slide into position when you insert the key and also prevent them from becoming stuck.

A more serious issue is that it is damaged or worn which makes it ineligible to engage the internal pins of the ignition cylinder. This can cause the cylinder of ignition to stop turning and stop you from starting your car. In this situation you'll have to take your vehicle to an auto repair shop or locksmith to get service.

If you can turn your car using a spare key and you've ruled out issues with the steering wheel or battery It could be that the ignition cylinder has worn out. You can try to loosen the lock cylinder by using the sharp end of a screwdriver, or the handle of a hammer (not the head). Often, tapping gently on the cylinder will release it to allow you to turn your car key. If this does not work then you'll need to replace the lock cylinder by a mechanic.

Check the Ignition Socket

The ignition socket is the place where your key is inserted and removed when inserted. It can get clogged up with debris, or just wear and tear. You can try squirting some silicon lock lubricant (like WD-40) into the ignition to make things move forward.

You can also use a small hammer, and tap gently on the inside of the ignition to try to loosen or reset the pins that are not aligned. Be cautious not to overdo it, or you could cause severe damage to the ignition switch.

Before you try this, make sure that the gearbox of your car is in neutral or park. Many modern cars have an option to lock the steering wheel when it is not in park or neutral that can stop the key from being turned in the ignition.

If you've tried all of this and still cannot get your key to rotate it is likely that the housing of your Ignition Key Won't Turn cylinder needs replacement. It is important to know that different vehicles have different procedures for replacing the ignition cylinder.

Generally, this means taking off the plastic cover that is over the steering column and ignition assembly. To remove it, you'll have to adjust the tilt-wheel to its lowest position. Then, remove any fasteners that are holding it in place.

After removing the cover you'll need to remove the old ignition cylinder from the steering column. Then, you'll need to compare the new ignition cylinder that you purchased with the one you removed to confirm that they are the same. Once this is done the new ignition cylinder can be installed in the same manner that the old one was removed.

Sometimes, despite our efforts, the ignition can be damaged and require replacement. It is recommended that if this happens, you call an Tempe Locksmith. A locksmith can assist you in choosing the appropriate replacement and then install it correctly, so that your car can be started again.