• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Window Repairs

Window repairs can save homeowners money and make their homes warm. In the event of severe damages, like broken glass or a shattered frame, a replacement window may be required.

But many other issues can be addressed to extend the life of your windows. Some common problems include:

Cracked or broken panes

Glass that is cracked can be caused by a lawnmowers who throws errant rocks or by a tree branch being blown by strong winds. It's not just visually awful, but it could also lead to higher energy bills as broken glass lets cold air into your house. Luckily, it's usually relatively easy to fix windows with cracked panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have to employ a utility knife to break loose any remaining putty or old glazing compound that has accumulated around the edges of the frame. Then, clean the glass's surface and the frame's wood with a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking on the frame's perimeter. This will stop water from getting into the frame through the crack and result in further damage.

A serious crack in double-paned glass could affect the gas between the panes, making your windows less insulative. If the crack is significant enough to compromise the quality of the glass or the glass has an inner pane completely missing, it's time to call in an expert.

Thermal stress cracks may also occur when there is a drastic difference in temperature inside and outside your home. The glass is then able to expand and contract. If the cracks are situated on two sides of a window, it is recommended to replace it instead of attempt to repair it.

Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It will also keep out cold and bugs. You can cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This isn't an indefinite solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks appearing on your older windows it is recommended to contact your local company to see whether replacing the entire window Repair is a better option.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can ruin a house's appearance and create a security danger. However, it is possible to repair wood that has rot. You will first need to address the cause of the wood rot. This can be done by looking for leaks in the roof and gutters that aren't functioning cracking caulking, and any other areas which allow water to penetrate the wood.

You'll then have to take off the rotten parts of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. Once the rotten areas have been cleared it is time to replace them with new wood. Pre-treated wood is suggested for this task, since it is resistant to the onset of rot. If you are unable to replace the damaged timber then you can use filler and wood hardener to strengthen the damaged area. Most hardware stores will carry this type of product. Follow the directions on the label of the product to get the best results.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens, for example is a great one to apply.

It is also possible to use a two-part epoxy filler to shield the wood from further damage. It is easy to apply and leaves a beautiful finish. However, it's important that you adhere to the instructions for application on the label. After the epoxy filler dries you can sand the wood's surface. Start with a rough sandpaper, and then move on to a smoother grade.

The most important thing you don't would like to do is make the area that has been damaged by exposed to more water. Therefore, it is an ideal idea to cover the repaired area with an oil-based primer which will help protect it from moisture. After that, you can apply the wood sealant, which is waterproof.

Won't Open

There are a variety of reasons windows won't open. Wood frames can warp in rainy weather, or the house could have settled or someone could have closed it for security reasons. But with some patience and the right tools, all windows that are stuck can be opened.

The accumulation of gunk or debris could be the main cause of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Spraying grease on these areas to aid in preventing oxidation and keep your windows functioning correctly.

The pulleys used to raise or lower the window may become loose, or break. These components can lose their tension and cause obstruction especially when the window is two or more stories above the ground.

If you have difficulty opening a door, try using a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer around the edges of the frame for a few minutes to warm the wood and assist it move more easily.

A faulty spring can also be the cause of windows that don't raise or lower. You'll need to check the owner's manual for more information depending on who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they still won't open, it might be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows in your home go from functional to inoperable. If a window isn't properly shut can leave your home vulnerable for water damage and burglary. Contact our team today for more information on our replacement windows and our services!