• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the window and the door is significant, you may want to use security screens that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be fixed by a uPVC window repair expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with a breeze. These are easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges will be damaged over time. Changing a window hinge is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, causing gaps where the sash meets frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it is feasible to give them a clean but in certain cases, it may be necessary to have them replaced.

The next most common cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and lessen draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as you can.