• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your upvc window repairs near me window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle wears out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be done by any skilled DIYer. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer can be applied. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repair windows are brittle to open, or slack and open with ease it could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a simple process, but it's easier when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges, also due to wear and tear can become misaligned, this causes a gap to form where the sash joins the frame. They can be repaired by giving them a good clean, but when they're beyond repair, it may be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as possible.