• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Programming a Reprogram Subaru Key Key Fob at Home

Depending on how old your Subaru is, you may require the key fob programmed by an automotive or dealer locksmith. This is accomplished by connecting a computer-based programming machine to your car.

To program your Subaru begin by unlocking the driver's doors using the door button control, then close it. You will hear a chime from the instrument panel and the dome lights will flash.

Step 1: Find the circuit board for your transmitter

There are a few different ways to program your key fob. First, you must determine what kind of key fob you have. This can be done by looking at the shape of the key fob or by listening to your car for a chime.

Once you have these details, you are able to begin the process of programming your key fob at home. To accomplish this, you'll need a metal key and a screwdriver with a flat head. Open the key fob by twisting. Push the metal key into the case, and then let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2 2. Unscrew the Key Fob Case

Changing the battery is a good idea since it can revive key fobs which aren't working any more. In some instances the buttons on the key fob could be broken. If you see that the metal contacts of the button are loosened Try soldering them into place again in order to make them function once more.

Before you begin the process, ensure the doors of your car are shut and the ignition is off. You can do this by closing your driver's side door and pressing your door button ten times in quick intervals. Then, you'll hear the instrument panel chime and your dome lights will blink. This indicates you're now ready to move on.

Step 3. Insert the key fob into the ignition

There are many articles online that will give you instructions on how to program a replacement or new subaru outback key replacement cost key fob at home, but the majority of them aren't particularly specific. A professional auto dealer or locksmith in Fort Bliss is the best option for reprogramming an electronic car key.

Sit in the driver's seat with all doors shut and the engine off. You can open the door button control and use it to unlock all doors. Open and close the driver's door two more times. Insert and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system will vibrate when the settings are altered.

Step 4 4. Turn on the ignition.

Before proceeding with this method of programming a key fob, it is crucial to know that this method only works in the event that you already have a functioning key already. If you don't you can find an auto-locksmith or dealer who will need to program the key fob for your Subaru Fort Bliss.

Once the key has been programmed, it will be capable of starting your vehicle in about 5 seconds. Begin by closing all doors, then turning off the engine. Sit in the driver's seat and open all doors using the button for the door. Put the key in the ignition then turn it on to the off position (the electrical systems will come on, but the engine remains off), and then back to the off position 10 times in rapid succession.

Step 5: Unlock the Driver's Door

Subaru offers a variety of high-end cars with key fobs which lock and unlock doors, turn on the engine, and defrost windows. These devices may stop functioning.

To fix this problem to fix it, you must contact a locksmith or the dealer. This will solve the issue and make sure that your vehicle is secure.

First, you must open and close the driver's side door. Then, insert the ignition key in and switch it to the initial position. Then, turn it back to the off position. Do this as fast as you can 10 times. After the tenth repetition, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

If you're looking to replace the battery in the subaru replacement keys key fob, the procedure is easy. First, you must open the exterior fob casing. Make use of a flathead to pry the interior case open and remove the batteries that were in there.

After removing the battery, replace it with a new one and close the case. Sit in the driver's seat and open all doors using the door button control. Put the key in the ignition and turn it to ensure that the electrical system is on, but the engine is off. Repeat this 10 times in a line until you hear a sound on the instrument panel. This will put the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For some owners, the annoyance sound heard when locking or unlocking a subaru new key key fob from outside the vehicle may become distracting. In some cases you can turn off the sound by shutting and opening all doors while double-clicking the lock button on your key fob.

Switch the ignition off and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. After that, the instrument panel emits an audible chime. The chirp indicates that the fuel-filler lid and door lid are locked. The setting can be altered so that the lids and doors lock automatically without having to press the request switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number

Remember the first 8 digits in your mind. Now, climb into the driver's chair, close the doors and turn the key in the first position. After 10 turns, your instrument panel will chime once.

The circuit board for the transmitter is located inside the key fob case. There will be two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. For older models, this procedure may require a visit the dealer.