• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유
• 

How to Programming a Subaru Key Fob at Home

Depending on how to get a new subaru key brand new your Subaru is, you might need to have the key fob programmed by an auto locksmith. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru to program, open the driver's door by pressing the door button and then close it. You will hear the chime and see the dome lights blink in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are a variety of ways to program your key fob. First, you need to determine the kind of key fob you have. This can be done by inspecting the shape of your key fob or by listening to the car's chime.

Once you have the information then you can begin the process of programming your keyfob at home. To do this, you will require a metal key and a screwdriver with a flat head. You can open the key fob by twisting. Then push the metal key into the case and then release the battery from the small tabs that secure it. Replace the battery and put the case back together.

Step 2 Step 2: Unscrew your Key Fob Case

Change the battery is a good idea since it can help revive key fobs which aren't working any more. However, there are instances where the buttons on the key fob could be damaged. If you notice the button's metal contacts have been damaged Try the process of re-soldering them to ensure that they function properly.

Before you begin the process, make sure the doors of your car are shut and your ignition is off. Close the driver's side door and press your button 10 times in rapid succession. Then, you'll hear the instrument panel chime, and your dome lights will blink. This means you're ready to move forward.

Step 3: Insert the key fob into the ignition

There are numerous articles online that give you instructions on how to program a replacement or new subaru smart key key fob at home, however they are not precise. A professional locksmith or auto dealer in Fort Bliss is the best solution for reprogramming your electronic car key.

Sit in the driver's seat of your subaru key locked in car with the engine off and all doors closed. You can open the door button control and use it to unlock all doors. Open and close the driver's door a second time. Remove and insert the ignition key (don't turn it) 10 times in 40 seconds. The system will sound a chirp when the settings are altered.

Step 4 4. Turn on the ignition.

Before you begin this process of programming a key fob, it is crucial to know that this method works only if you own one working key already. If not then a dealership or auto locksmith will be required to program a brand new key for your subaru key locked in car in Fort Bliss.

Once your key is programmed and you are able to start your car in less than five seconds. To begin, make sure all doors are closed and the engine is turned off. Assume a seat in the driver's chair and unlock all doors by pressing the button on the door. Place the key in the ignition and turn it back to the first position. The electrical systems will be activated however the engine will remain in neutral. Repeat this process ten times.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers many high-end automobiles with key fobs that lock and unlock doors, start the engine, and even defrost windows. These devices are sometimes not functioning.

Find a locksmith or dealer to resolve the issue. This will resolve the issue and make sure that your car is safe.

You must first open and close the door to the driver's side. Put the key in the ignition, and then turn it to position 1. Then, reverse it to the off position. Do this as fast as you can 10 times. After the tenth repetition, you should hear a chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The procedure for replacing the battery in the subaru Remote key (sciencewiki.science) fob is a breeze. First, open the exterior fob casing. Then you can use the flathead screwdriver open the inside of the case and then remove the battery.

After taking the battery out and replacing it with the new one. Close the case. Next, sit in the driver's seated position and unlock all doors using the door button control. Finally, insert the ignition key and turn it to ensure that the electrical systems are switched on but the engine is off. Repeat this 10 times in succession until you hear a chime from the instrument panel. This puts the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when you lock or unlock a Subaru Key Fob from outside of the vehicle can be distracting for certain owners. In certain situations you can turn off the sound by shutting and opening all doors while double-clicking the lock button on the key fob.

Close all doors, including the fuel-filler lid, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is achieved. The chirp indicates that the door and fuel-filler lid are locked. It is possible to alter the setting to make the doors lock automatically and without pressing a button.

Step 8: Enter the 8-Digit Transmitter Number

Write down the first series of 8-digits, and keep it in a safe place. Now, get into the driver's seat, shut the doors and turn the key in the first position. After ten turns, your instrument panel should chime once.

Then, you need to open the key fob case and look for the transmitter circuit board inside. There will be two or three sets of numbers (8-digits) on the circuit board. Take note of the first number sequence, and follow the instructions in this guide to register the code in the system of your vehicle. For older models, this procedure may require a visit the dealer.